Accessories

R0172S Dog Bone Connectors – Stainless Steel Bolt

The Dog Bone Connector Set is used for joining our SMD modules together including jet ski docks and D-Series boat lifts. Sold in sets (Top & Bottom Dog Bone with stainless steel Bolt).

R0172 Dog Bone Connectors – Nylon Bolt

The Dog Bone Connector Set is used for joining our SMD modules together including jet ski docks and D-Series boat lifts. Sold in sets (Top & Bottom Dog Bone with nylon Bolt).

R0178S Dog Bone Infill – Standard

Rotomoulded Dog Bone Infills fill the unused dog bone connector voids to create smooth even surfaces on Superior Modular Docks, jetski docks and boatlifts. They eliminate trip hazards and improve the visual appearance of the modules. The material is the same UV resistant PE as the modules and perfectly matches the colour. Available with smooth and grip surface.

R0178G Dog Bone Infill with Grip

Rotomoulded Dog Bone Infills fill the unused dog bone connector voids to create smooth even surfaces on Superior Modular Docks, jetski docks and boatlifts. They eliminate trip hazards and improve the visual appearance of the modules. The material is the same UV resistant PE as the modules and perfectly matches the colour. Available with smooth and grip surface.

R0166 Dog Bone ½ with M12 x 60 Rod Complete

The ½ Dogbone connector set is used for connecting and strengthening brackets on SMD modules including Jet Ski Docks. Sold in sets (½ Dogbone with coach screw, nyloc nut and washers).

R0167 Dog Bone ½ with M16 x 95 Rod Complete

The ½ Dogbone connector set is used for connecting and strengthening brackets on SMD modules including Jet Ski Docks. Sold in sets (½ Dogbone with coach screw, nyloc nut and washers).

R0169 Dog Bone ½ with polyurethane with M12 x 60 Rod Complete

The ½ Dogbone polyurethane connector set is used for connecting and strengthening brackets on SMD modules including Jet Ski Docks. Sold in sets (½ Dogbone with coach screw, nyloc nut and washers) – for commercial use.

R0226 Deluxe Ladder (for SMD)

The deluxe SMD ladder is a great addition to your pontoon, allowing easy access to and from the water. Often fitted as a safety device or for easy access for swimming these ladders are designed to be used with the Superior Modular Dock system.

R0225 Deluxe Ladder (for pontoon)

The deluxe ladder is a great addition to your pontoon, allowing easy access to and from the water. Often fitted as a safety device or for easy access for swimming these ladders are built using marine grade aluminium and consist of 3 steps making the ladder very easy to use. Dimensions – 100 × 80 × 90 cm.

FLT Floating Ladder

The floating ladder is designed to attach to Superior’s unique bolt on waler system and can also be retrofitted to most pontoons and jetties. It will help you get in and out of the water with ease. L: 180 x 60 x 35cm.

F0070DM Aluminium Light Post – Deck Mount

The deck mounted aluminium light post is manufactured from marine grade aluminimium. It is designed to take a standard fluro or led light

F0070WM Aluminium Light Post – Waler Mount

The waler mounted aluminium light post is manufactured from marine grade aluminimium. It is designed to take a standard fluro or led light.

F0045 Dome Light Post

The dome light post is manufactured from marine grade aluminium. It is 1.8 metres high and designed for dome light.

F0040-DOM Light Tower Power Pedestal

The rotomoulded Superior Light Tower Power Pedestal is designed for a jetty, pontoon or marina. The pedestals are equipped with an RCD which is a sensitive safety device that switches off electricity automatically if there is a fault. An RCD is designed to protect against the risks of electrocution and fire caused by earth faults. A light sensor is built into the light tower which automatically turns the LED lights on and off. Also included are 2 x 240v outlets and water tap. The light tower is manufactured to the highest Australian Standards and has been designed to last with UV stable materials and IP67 rated weather-proof wiring. Other socket sizes and configurations are available on request.

F0040-DOM Light Tower Power Pedestal

The rotomoulded Superior Light Tower Power Pedestal is designed for a jetty, pontoon or marina. The pedestals are equipped with an RCD which is a sensitive safety device that switches off electricity automatically if there is a fault. An RCD is designed to protect against the risks of electrocution and fire caused by earth faults. A light sensor is built into the light tower which automatically turns the LED lights on and off. Also included are 2 x 240v outlets and water tap. The light tower is manufactured to the highest Australian Standards and has been designed to last with UV stable materials and IP67 rated weather-proof wiring. Other socket sizes and configurations are available on request.

Replacement Photocell

Replacement photocell for domestic pedestal: LC-105, E230352, 220V AC, 50/60Hz

C0461A Fire Hose Reel Cover

Superior has designed from the ground up this rotomoulded plastic fire hose reel cover, built with UV stable material these units are built to last. Superior Hose Reel Covers (HRC) are polyethylene, the same tough material used for road impact barriers. They protect fire hoses against constant damage caused by sun, rain and wind.

C0461A Fire Hose Reel Cover

Superior has designed from the ground up this rotomoulded plastic fire hose reel cover, built with UV stable material these units are built to last. Superior Hose Reel Covers (HRC) are polyethylene, the same tough material used for road impact barriers. They protect fire hoses against constant damage caused by sun, rain and wind.

C0461A Fire Hose Reel Cover

Superior has designed from the ground up this rotomoulded plastic fire hose reel cover, built with UV stable material these units are built to last. Superior Hose Reel Covers (HRC) are polyethylene, the same tough material used for road impact barriers. They protect fire hoses against constant damage caused by sun, rain and wind.

F0069 Kayak Holders

F0069 Kayak Holders

F0069 Kayak Holders

Kayak Holders are a great addition to your pontoon gangway, these brackets will allow you to store a kayak or SUP out of the way but yet easily accessible when you want to use it.

PFR01386C Pile Ring – Extra Small

Rotomoulded polyethylene two part bolted structure. Protects piles from barnacles and other marine growth. Easy installation – the pile bracket does not need to be removed.

To suit: 300-315mm piles & 355mm piles.

PFR02486C Pile Ring – Small

Rotomoulded polyethylene two part bolted structure. Protects piles from barnacles and other marine growth. Easy installation – the pile bracket does not need to be removed.

To suit: 400mm piles & 450mm piles.

PFR03600C Pile Ring – Medium

Rotomoulded polyethylene two part bolted structure. Protects piles from barnacles and other marine growth. Easy installation – the pile bracket does not need to be removed.

To suit: 500mm piles & 550mm piles.

PFR04860C Pile Ring – Large

Rotomoulded polyethylene two part bolted structure. Protects piles from barnacles and other marine growth. Easy installation – the pile bracket does not need to be removed.

To suit: 710mm Piles & 730mm Piles.

C1154 Easy Step

Made from rotomoulded plastic, the Easy Step is a simple solution to many out of reach places. It is extremely strong to last in harsh conditions and features a non-slip pattern across the top section and on each of the four individual steps making it safe and easy to use in wet or damp situations. Dimensions – 460mm x 4600mm x 360mm high.

C1154 Easy Step

Made from rotomoulded plastic, the Easy Step is a simple solution to many out of reach places. It is extremely strong to last in harsh conditions and features a non-slip pattern across the top section and on each of the four individual steps making it safe and easy to use in wet or damp situations. Dimensions – 460mm x 4600mm x 360mm high.

C1154 Easy Step

Made from rotomoulded plastic, the Easy Step is a simple solution to many out of reach places. It is extremely strong to last in harsh conditions and features a non-slip pattern across the top section and on each of the four individual steps making it safe and easy to use in wet or damp situations. Dimensions – 460mm x 4600mm x 360mm high.

Pile Caps LARGE 600MM – 1020MM

600mm, 610mm, 640mm, 660mm (custom made) 710mm, 750mm (custom made) 810mm, 1020mm

White Polyethylene (PE) conical cap used to prevent birds landing on piles and causing an unwanted mess.

Pile Caps MEDIUM 400MM – 580MM

400mm, 410mm, 450mm, 510mm, 565mm, 580mm

White Polyethylene (PE) conical cap used to prevent birds landing on piles and causing an unwanted mess.

Pile Caps SMALL 160MM – 360MM

160mm, 225mm, 250mm, 300mm (custom made), 315mm, 350mm, 360mm (custom made)

White Polyethylene (PE) conical cap used to prevent birds landing on piles and causing an unwanted mess.

MB018 18″ Mooring Buoy

18″ Mooring Buoy – one piece rotomoulded medium density 100% virgin polyethylene buoy inlcudes HDPE mooring collar. Unsinkable and impact resistant.

MB024 24″ Mooring Buoy

400mm, 410mm, 450mm, 510mm, 565mm, 580mm

24″ Mooring Buoy – one piece rotomoulded medium density 100% virgin polyethylene buoy inlcudes HDPE mooring collar. Unsinkable and impact resistant.